ACRYLA-CLAD 2000 Acrylic Enamel
Acrylic Enamel / 2K Enamel
High Performance Acrylic Enamel Industrial Coating

Ideal topcoat for any adequately prepared substrate such as steel, aluminum, galvanized, fiberglass and concrete. Also ideal for use on properly prepared wood surfaces.

AQUA-CLAD 1600 Water-Reducible Enamel
WR Alkyd Enamel / Modified Acrylic Enamel
High Performance Water-Reducible

Ideal for use on exterior steel, aluminum and fiberglass, also ideal for use on properly prepared wood, and concrete surfaces.

POLY-CLAD 2500 Urethane Enamel
Aliphatic Acrylic Urethane Enamel
High Performance Quick-Dry Urethane

Premium topcoat for any adequately prepared substrate such as steel, aluminum, galvanized, fiberglass and concrete. Also ideal for use on properly prepared wood surfaces.

CHROMA-CLAD 800 High Solids Alkyd
Quick-Dry Alkyd Enamel
High Performance Quick-Dry Alkyd Enamel

Excellent topcoat for any adequately prepared substrate such as steel, aluminum, galvanized, and fiberglass for industrial applications.

OPTI-SHIELD PREMIUM 3700 Gloss Acrylic Enamel
Water Borne Acrylic
High Performance Quick-Dry Acrylic Enamel

The 3700 Series was developed with home painting in mind, although it is also a quality industrial finish for some applications where high gloss and exceptional leveling are requirements. Apply above 50° F to rigid substrates. Exterior use on wood and fiberboard may result in cracks in the coating. Try to avoid cold, wet conditions when painting. An excellent glow of 76% is routine, but vary depending on color chosen.

CHROMA PRIME 70 Gray - 72 Brown Oxide
73 Red Oxide - 75 Zinc Chromate
Industrial and Shop Primers
High-Solids Alkyd Primer

Designed for clean, abrasive blast or slightly rusted steel surfaces. Ideal for use on equipment and machinery which must be placed back in to service promptly. It is an excellent shop coat primer due to its fast dry and "universal" compatibility with other finishes.

AQUA-PRIME
7000 Gray - 7400 Red Oxide
Industrial & Shop Primers
Water / Reducible Alkyd Primer

Lead-free, low VOC, and fast dry direct to metal primer. Deisgned for application to properly prepared ferrous and non-ferrour metal, in mild to moderate industrial environment. Ideal for use on equipment, machinery and other areas when minimal downtime is required.

EPOXA-PRIME
7600 Epoxy Primer
High Solids - High Build Polyamido-Amine Cured
High Performance Corrosion Resistant Epoxy Primer

Apply to clean properly prepared metal only. Can be applied directly to steel. When coating is galvanized. A pre-prime coat of vinyl wash primer is recommended.

METAL PRETREATMENT
7800 Vinyl Wash Primer
Acid / Chromate Pretreatment for Metals
Pretreatment

Developed as a Wash Primer / Pretreatment for non-ferrous metals prior to priming. May also be used on blasted clean steel surfaces with some vinyl coating systems. Also suitable for use on galvanized metal prior to application for primers. Excellent for etching aluminum and many composite materials. All metal surfaces must be clean and dry before coating. Remove all traces of mill scale, rust, etc., preferably by sandblasting. A 2-component primer to be mixed one to one, A to B, by volume.